What You Need to Properly Clean Tile Floors

Have you ever experienced an accidental liquid spillage on your floor? Have you ever panicked about cleaning up your tiles? If both of your answers are NO, then Check out the post on floorcleaningtools. Cleaning floors is not an easy task, most especially if you’re trying to remove stains. There is a lot to consider such as the choice of cleaning agents and the right tools to use.

Moreover, there are different types of tile floorings, and each requires a different manner of cleaning. In this article, we’ll give you tips on how you can specifically clean tile floors. Basically, these are what you need:

Baking Soda and Water

This is a miraculous combination for cleaning up ceramic tiles. You need to mix 5 tablespoons of baking soda into the water until it becomes fully dissolved. Damp a towel or a scrubber to the solution and scrub off the stained area or just the portion you’d like to clean.

This works well on stains caused by liquid spillages. It is also a good practice to polish up your floor regularly with this mixture to maintain its shine and cleanliness. This is best for porcelain tiles.

Vacuum Sweeper

For dirt and stains that have sunk to tile spaces, don’t be tempted to just scoop it out. Use an air dryer or a vacuum sweeper to sip out the dirt and the dust. For a normal cleaning day, it is best to vacuum sweep twice before and once after floor scrubbing and polishing.

For faux cement tiles, you don’t have to scrub it off and mop it up. You only need to sweep it with vacuum regularly to maintain its shine and tidiness.

Scrub
Using floor scrubbers are convenient for cement-based and wood-based floorings. However, they’re not suitable for tile floorings since they may scratch up the surface. For scrubbing, a plastic brush is a better choice than a metal brush as it is lighter and easier to use. Rough-textured tiles, the ones used mostly outdoors, can also be cleaned up by using a brush. Using a scrub also works for natural stone tiles.

Wax

Wax is great as a polishing agent, but it may not work as fine with other tile surfaces. Wax works best in cement and wood since it gives a shiny finish and a fine polished look. Using wax on tiles, however, may damage its surface and stain its covering. Wax isn’t advisable to be used as a polishing agent on tile floors.

Liquid Polish

Liquid polish is the tile alternative for wax. It is a colorless solution that does not stain the tile and leaves a shiny finish. This cleaning agent may be bought at convenience and hardware stores. It is also the same material in which car body polishers are made of. This works best with slate porcelain tiles.

Hot Water and Detergent

For an unexpected stain such as coffee spills and viand sauces, you may use hot water and detergent to make a solution. The dissolved detergent will act as a cleaning agent while hot water will help soften and loosen up the stain. This is really helpful for instant cleanups and tidying jobs.

Leave a Reply

Your email address will not be published. Required fields are marked *